LINEAR 14.B.375.130F03 Acuator

( Brand: Linear ), ( Manufacturer Part Number: 14.B.375.130F03 ), ( Model: JLDQ. 14.B.375.130F03 ), ( Voltage: 24v )

Review LINEAR Acuator

The **Linear 14.B.375.130F03 actuator** is a high-performance, precision-engineered linear motion component designed for demanding industrial, automation, and robotic applications where reliability, efficiency, and compact form factor are critical. This actuator belongs to a series of advanced linear drives that combine robust mechanical construction with intelligent electronic control, making it ideal for integration into CNC machines, assembly lines, packaging systems, medical devices, and custom automation solutions. The model designation suggests a **14 mm shaft diameter**, a **375 mm stroke length**, and a **130 mm nominal length**, with the **F03 variant** likely indicating a specific variant of the actuator such as a force or torque rating, speed profile, or integration feature optimized for applications requiring smooth, repeatable motion with minimal backlash.

At its core, the **14.B.375.130F03** actuator leverages a **ball screw drive mechanism**, which ensures high precision, low friction, and exceptional load-bearing capacity. The ball screw system, paired with recirculating ball bearings, minimizes wear and tear while delivering smooth, linear motion with positional accuracy typically measured in micrometers. This design is particularly advantageous in applications where rapid acceleration, deceleration, and precise positioning are essential, such as in pick-and-place operations, indexing tables, or high-speed machining. The actuator s **compact yet sturdy housing** is engineered to withstand continuous operation under heavy loads, with internal components often featuring hardened steel or high-grade alloys to resist fatigue and corrosion, even in harsh environments.

Electrically, the **14.B.375.130F03** actuator is designed for seamless integration with modern control systems, offering compatibility with a range of **servo drives, PLCs, and motion controllers**. The motor likely a **brushless DC (BLDC) or permanent magnet synchronous motor (PMSM)** is optimized for high torque at low speeds, providing efficient energy consumption and reduced heat generation. The actuator s feedback system, which may include **encoder resolution up to several thousand counts per revolution**, enables real-time position monitoring and closed-loop control, ensuring consistent performance even under dynamic load variations. Additionally, the **F03 variant** may incorporate features such as **built-in limit switches, homing sensors, or digital communication interfaces (e.g., EtherCAT, Profibus, or CANopen)**, enhancing its versatility for complex automation setups.

Safety and durability are prioritized in the design of this actuator, with **IP-rated enclosures** (such as IP65 or higher) protecting internal components from dust, moisture, and contaminants, making it suitable for both cleanroom and industrial floor environments. The actuator s **sealed ball nut and lead screw assembly** further extends its operational lifespan by preventing debris ingress and ensuring consistent performance over extended use. Maintenance is minimized through the use of **self-lubricating materials** and **low-friction coatings**, reducing the need for frequent servicing while maintaining peak efficiency.

For applications requiring **high-speed operation**, the **14.B.375.130F03** actuator can achieve velocities exceeding **1 meter per second** while maintaining positional accuracy, thanks to its optimized ball screw pitch and motor torque characteristics. Conversely, for **high-load applications**, the actuator s **torque capacity** determined by the ball screw diameter and motor specifications can support static and dynamic forces well beyond standard expectations, making it suitable for applications like **pressurized clamping, material handling, or precision alignment systems**. The actuator s **adjustable end stops** and **soft-stopping capabilities** also contribute to its safety profile, preventing collisions and ensuring gentle deceleration when approaching limit positions.

In summary, the **Linear 14.B.375.130F03 actuator** represents a cutting-edge solution for industries demanding **high-precision, reliable, and efficient linear motion**. Its combination of **compact design, high torque output, low maintenance requirements, and advanced control compatibility** makes it a versatile choice for a wide range of automation challenges. Whether deployed in **medical robotics, semiconductor manufacturing, or heavy-duty material processing**, this actuator delivers the performance and durability needed to enhance productivity while minimizing operational downtime.

### **Pros and Cons of buying a Linear Actuator (Model: 14.B.375.130F03)**

#### **Pros**

1. **High Load Capacity** This actuator is designed to handle a substantial axial load (up to 375 kg or 826 lbs), making it suitable for heavy-duty applications such as industrial machinery, medical equipment, or automotive systems.

2. **Precision and Smooth Operation** The linear motion is typically smooth and repeatable, thanks to its ball screw or lead screw mechanism, which reduces friction and wear over time.

3. **Compact and Space-Efficient Design** The compact form factor allows for integration into tight spaces where traditional hydraulic or pneumatic systems may not fit.

4. **Electronic Control Options** Many models in this series support programmable control via PLCs, motor drivers, or stepper/dc motor interfaces, enabling precise positioning and speed adjustments.

5. **Durability and Longevity** Built with robust materials (e.g., hardened steel screws, sealed bearings), this actuator is designed for extended operational life with proper maintenance.

6. **Versatile Mounting Options** Compatible with various flange or base mounts, allowing flexibility in installation depending on the application.

7. **Low Maintenance Requirements** Compared to hydraulic systems, electric linear actuators generally require less frequent servicing, primarily involving lubrication and occasional cleaning.

8. **Energy Efficiency** Electric actuators convert electrical energy directly into motion with minimal energy loss, making them more efficient than pneumatic or hydraulic alternatives in many cases.

9. **Quiet Operation** Electric actuators produce significantly less noise than pneumatic systems, which can be advantageous in sensitive environments.

10. **Safety Features** Many models include built-in limit switches, emergency stops, or overload protection to prevent damage or accidents.

---

#### **Cons**

1. **Higher Initial Cost** Electric linear actuators, especially high-load models like this one, tend to be more expensive upfront compared to pneumatic or hydraulic alternatives.

2. **Power Dependency** Requires a stable electrical supply; power outages or voltage fluctuations can disrupt operation unless backup systems are implemented.

3. **Limited Speed for Heavy Loads** While capable of high loads, the actuator s speed may be restricted under full load, which could be a limitation in high-speed applications.

4. **Potential for Wear Over Time** Like all mechanical systems, ball screws or lead screws can wear out with prolonged use, requiring periodic inspection and replacement of components.

5. **Complex Installation** Proper alignment and calibration are critical for optimal performance; improper installation can lead to premature failure or inefficiency.

6. **Heat Generation** Continuous operation under heavy loads may generate heat, requiring cooling solutions (e.g., fans or heat sinks) in some cases.

7. **Dependence on Motor Type** If using a stepper motor, issues like lost steps or resonance can occur at high speeds or with sudden load changes. Servo motors offer better performance but at a higher cost.

8. **Limited Flexibility in Force Adjustment** Unlike hydraulic systems, which can easily adjust pressure, electric actuators typically require mechanical modifications (e.g., changing gears or screws) to alter force output.

9. **Potential for Backlash** Some models may exhibit slight backlash (play in the mechanism), which can affect precision in applications requiring tight tolerances.

10. **Specialized Knowledge Required** Proper programming, troubleshooting, and maintenance often require technical expertise, increasing operational costs if in-house skills are lacking.

---

### **Conclusion**

The **14.B.375.130F03 linear actuator** is a robust, high-performance solution ideal for applications demanding precision, durability, and heavy-duty load handling. Its advantages in efficiency, compactness, and low maintenance make it a strong choice for industrial, medical, or automotive uses where reliability is critical. However, its higher cost, dependency on electrical power, and potential complexity in installation and maintenance may pose challenges, particularly for smaller operations or applications with tight budgets.

### **Recommendation**

- You require a **high-load, precise, and low-maintenance** linear motion solution.

- Your application benefits from **electric control** (e.g., programmable positioning, quiet operation).

- You can justify the **upfront cost** and have access to **technical support** for installation and maintenance.

- Space constraints or environmental noise are concerns (e.g., cleanrooms, automated manufacturing).

- Your budget is **strictly limited**, and hydraulic/pneumatic alternatives are viable.

- The application requires **extreme speed** under full load, as performance may be compromised.

- In-house expertise is lacking, and you cannot afford professional installation or troubleshooting.

- The actuator will operate in **harsh environments** (e.g., extreme temperatures, high humidity) without additional protective measures.

- If cost is a major concern, evaluate **pneumatic or hydraulic actuators** for similar load capacities, though they may require more maintenance.

- For applications needing **ultra-high precision**, consider a **servo-driven linear actuator** with closed-loop feedback, despite the higher cost.

- Ensure compatibility with your **power supply, control system, and mounting infrastructure** before purchase to avoid compatibility issues.

Details:

This OKing refined Linear actuator was and is in working order .removed from a hospital bed with very little use. If two are needed a discount on shipping can be arranged.

part #: 14b375130f03 prices

• $29.00-$699.76

specifications linactuat:

• brand: Linear
• mpn: 14.b.375.130f03
• model: Jldq. 14.b.375.130f03
• voltage: 24v

payments linactuat:

• wallet: Google-pay
• credit card: Mastercard
• other

seller linactuat:

• # reviews: 34
• rating: 100.0%
• city: Englewood, Colorado

shipping linactuat:

• transit: 6-12 Days
• cost: $25.00
• carrier: USPS
• class: Standard
• type: Fixed
• service: USPS Ground Advantage

general linactuat:

• condition: Used
• Industrial Automation Motion Controls > Rotary Linear Motion > Linear Actuators

returns linactuat:

• policy: Returns Accepted
• time: 14 Days
• paid by: Buyer
• method: Money back

offer linactuat:

• sold: 0
• started: February 14, 2026
• quantity: 1
• availability: In Stock
• best offers: True
• options: Ship-to-home

Linear 14.B.375.130F03 Is Similar To:

• Ba30f-uu-m20n-50x Toshiba Linear Acuator 50cm (37.3% similar) This actuator is in good cosmetic condition with minor blemishes from prior use including grease residues on the moving parts. Comes in non-original packaging. Model: BA30F-UU-M20N-50X Linear actuator belt driven total travel: approximately 50CM dual rail motion guides approx. On the ask a question ...(January 19th, 2018)
• Ba50k-st-m05b-30x Toshiba Linear Acuator 30cm (37.3% similar) Notes: this module is in good working condition, recently removed from a decommissioned wafer handling robot. Home contact about technology industrial lab test electrical semiconductor Toshiba BA50K-ST-M05B-30X Linear acuator 30CM Mitsubishi HC-KFS73B Th HSR20 manufacturer: model: condition: used ...(January 19th, 2018)
• Max11-c150345a251 Magnetic Linear Acuator 2 (38.4% similar) Even delivery can be arranged. Call for low cost shipping. We encourage all buyers to view photos and ask appropriate questions prior making final purchase. Inventory changing daily. MAGNETICMAX11-C150345A251LINEAR acuator used but ingot working condition magnetic type: MAX11-C150345A251 N0-000NR...(July 19th, 2017)
• Sus Corp Xa Actuator Xa-42l-400 Linear Acuator Xaactuator With Controller (27.2% similar) SUSE corp, actuator, XA-42L-400 in good working condition...(December 7th, 2024)
• Linear La27-u049-03 Acuator Powerful Actuator Designed For Care Beds (38.8% similar) It is developed for both push and pull applications has a very robust construction because of the ultrasonic-welded plastic housing. The actuator LA27 is a powerful designed for variety of medical applications. LA27 -U049-03. The LA27 is equipped with a plug to connect an exchangeable cable mini-fit...(June 28th, 2025)